Best Water Separator For Air Compressor 2020 – Hayy, are you looking for the best water separator for an air compressor then you are in the right place. You will get all information here.
Best Water Separator For Air Compressor 2020
#01 – LE LEMATEC Air Compressor Filter Oil Water Separator with Push Button Drain Valve with Teflon for Air Tools and Accessories
- Le Lematec air compressor filter oil and water separator works with any air compressor and air tool. The air filter traps dirt oil and moisture as a receiving filter for air tools.
- Keep air tools in tip top working condition and prevent costly repairs by preventing dirt and moisture from damaging your air tools and accessories
- LE Lematec air dryer is a heavy duty inline air filter. Made from aluminum with solid brass fittings, it offers excellent reliability. Features a 1/4 inch air inlet “female” and 1/4” “male”.
- Air compressor dryer provides quick and easy cleaning with its push button drain valve. Just push the button to eject oil dirt and water from the filter.
- The inline air filter works under standard operating pressure of 90 PSI up to 150 PSI maximum.
#02 – Neiko 30252A Water and Oil Separator for Air Line, 1/4″ NPT Inlet and Outlet, 90 psi
- Eliminates water, oil, dust, and particles in air line from air compressor
- Universal 1/4-inch NPT inlet and outlet design connects air line with pneumatic air tools and spray guns; max operating air pressure is 90 psi
- Stops water vapor and particles from entering pneumatic tools to extend tool life
- Catches water vapor and oil particles from entering spray guns to preserve tool life and provide a cleaner paint job
- Rust-proof aluminum housing and brass fittings provide additional tool durability
#03 – 30Mpa Oil Water Separator PCP Air Compressor 4500Psi Air Filter L350mm OD50mm (Air filter)
- ❤Applicable to all air pumps, pumps, and ultra-strong filters on the market. Space aluminum is mainly used, and the surface is golden anodized. About 90-95% of water and oil can be filtered out.
- ❤Integral molding, material safety. Contains: molecular race filter oil and water; activated carbon filter odor; moisture-proof beads filter water. And passed 50Mpa high voltage test.
- ❤The 2-head M10 * 1 female connector makes it easy for you to disassemble without wasting time; the 2-head M10 * 1 is the same as the new one for years.
- ❤Ultra-strong filtering of oil and water, does not corrode the container; longer and thicker container, oil and water separation up to 99%
- ❤One year warranty. Free set of filter cotton, can be recycled. Filter life: 40 bottles of 6.8 liters of high-pressure gas can be produced.
#04 – Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)
- What you get: you will receive 3 water oil separators, the blue end (concave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use
- General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience
- Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life
- Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can lead to pneumatic tools; Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools
- Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools; It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering pneumatic tools to extend tool life and provide cleaner operations, keeping your equipment performing at nice condition
#05 – 1/2″ Particulate filter water trap seperator moisture Compressed Air Compressor
- 1/2" NPT PARTICULATE FILTER / WATER TRAP TO REMOVE MOISTURE FROM COMPRESSED AIR LINES.
- THIS UNIT HAS 5oz POLYCARBONATE BOWL WITH METAL BOWL GUARD. 5u MICRON FILTER REMOVES 95% OF MOISTURE AND DEBRIS.
- 175 PSI MAX INPUT PRESSURE, 145 MAX OUTPUT PRESSURE, 106 CFM FLOW RATE. PLEASE NOTE::: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES::::
- COMES WITH A SEMI AUTOMATIC DRAIN THAT ACTS LIKE AN OVERNIGHT DRAIN. WHEN PRESSURE IS APPLIED TO THE BOWL, THE DRAIN WILL HOLD THE MOISTURE CONTENTS UNLESS YOU MANUALLY DISCHARGE IT. WHEN NO PRESSURE IS APPLIED TO THE BOWL, THE DRAIN AUTOMATICALLY OPENS TO RELEASE THE MOISTURE.
- REPLACEMENT FILTERS CAN BE FOUND ON AMAZON. ASIN B01MTC8AAH. COPY PASTE ASIN TO YOUR AMAZON SEARCH BAR.
#06 – LE LEMATEC Air Compressor Filter, Water Separator, Air Compressor Dryer with Drain Valve, For Air Tools, Plasma Cutters, and Air Lines (ZN312)
- The ZN312 air compressor water separator is compatible with any air compressors and air tools for convenience and cost-efficient solutions.
- This filter can stop oil, water, and debris from passing through air tools that may damage the tool itself and affect the operation. It can be installed even in the most complex system and layout.
- ZN312 filter has a compact design and made from zinc material with a steel push-button drain valve. It has 1/4 inch air inlet “female” and 1/4” “male” and operates at standard 90 PSI.
- Push-button drain valve to quickly expel trapped dirt, oil, and water from the air compressor filter without the need to disassemble. Just press the button and remove the collected air residue.
- Great inline filter for any air tool such as sandblaster, spray gun, plasma cutter, nail gun and more.
#07 – Air Filter, 3/8″ NPT wit Quick Release Bowl (Campbell Hausfeld PA212103AV)
- Cleans air and removes water vapor at the point of use to help support applications that require oil-free, moisture-free air, like spray painting. 3/8" NPT
- The cleaner/dryer system includes a quick-release bowl for easily viewing the fluid level
- An oil-removal filter traps 99.9 percent of all oil aerosols and a desiccant system removes water vapor
- The outlet screen keeps desiccant particles from entering the airstream, protecting air tools
- Uses Campbell Hausfeld PA2086 desiccant packs. Finish your projects faster and easier with Campbell Hausfeld - The Air Power Expert
#08 – HEAVY DUTY INDUSTRIAL RATED HIGH FLOW PARTICULATE FILTER, IN-LINE WATER TRAP FOR COMPRESSED AIR LINE SYSTEMS, 5 MICRON WITH METAL BOWL AND AUTO DRAIN (3/4″ NPT, 5oz)
- HEAVY DUTY 3/4" Compressed air line Filter seperator/Particulate Filter
- 3/4" Female NPT Air Inlet port X 3/4" Female NPT Air Outlet port
- With Internal Float Drain 140 CFM Flow Rate
- 175 Max Output pressure 175 PSI Max Input pressure
#09 – Jewboer Water Oil Separator Air Compressor Filter for Spray Gun Painting Sprayer Air Tools Air Line 1/4 inch NPT Inlet and Outlet\
- √Attaches Directly to Spray Gun or Air Tool
- √Eliminate Water,Oil & Foreign Particles From Compressed Air Lines
- √Universal 1/4"NPT inlet and outlet design easily connects air line with air tools and spray guns
- √Mainly suitable for paint spray gun and air compressor,matched used with gun,pneumatic tools and hoses
- √Condensation exhaust valve is included in this product,Air Pressure:90psi
#10 – CrocSee C1.8C.027 1/4″ NPT Thread 26CFM Automatic Drain Air Compressor Compressed In Line Particulate Moisture Water Trap Filter Separator with Mount
- Max.Flow Rate: 26 CFM (750 L/Min), Particulate filtration: 40 micron
- 1/4" Female NPT Air Inlet & Outlet port
- Working Pressure: 45PSI - 145PSI, Max. Working Temperature:140°F( 60°C)
- With a wall mounting bracket(Screws are not included)
- If the item you have received is defective in any way, please message us for 100% satisfaction and RISK FREE warranty: 1 year free replacement or full refund without return.
We will keep updating our content with different products and terms. So enjoy our post is created for you guys.
Stay connected with https://bestaircompressorguide.com